Student Log In
0432 969 070
(07) 5573 0216

Our VOC (Verification of Competence) Courses

Includes:

  • Forklift/High Reach, and/or Walkie Stacker and/or Attachments/Data Plates and/or Manual Handling and/or Other Custom Work Tasks

Course Cost: From $200 Onsite

Course Details

Locations

  • Onsite group bookings, or
  • Loganholme: 4/15 Josephine St, Loganholme QLD 4129 - Free Street Parking
  • Nerang: Unit 21, Jupiter Plaza, 21/12 Lawrence Drive, Nerang Qld 4211 - Free Parking

Requirements

  • No prerequisites

Certification

  • You will receive a VOC (Verification of Competence) of successful completion
  • Employer will receive evidence of VOC for their records
  • Annual refresher training recommended

On-site VOC

  • Groups of 3 or more participants
  • Duration 3 hours In-Person
  • Instructor-led in a supportive, group environment.
  • Suits hands on learners
  • VOC Statement Issued upon successful completion
  • On-site at your workplace
  • One on one practical observation
  • Theory Training
  • Qualified Trainers/Assessors and
  • Experienced Trainers/Assessors
Group & On-site Bookings

VOC Statement Issued For:

Forklift/High Reach

Duration: 3 hours in person
Cost: $250 per person

Topics Include:

  • Tailored to the specific workplace tasks/equipment
  • Pre-Operational & Safety Checks
    • Visual Inspection:
    • Fork Integrity:
    • Safety Devices:
    • Fluid Levels:
  • Operational Fundamentals
    • Data Plate Literacy:
    • Manoeuvring:
    • Attachments:
  • Stability & Load Handling Preventing tip-overs
    • Stability Triangle:
    • Safe Travel Height:
    • Ramps & Inclines:
    • Mast Position:
  • Hazard & Traffic Management
    • Pedestrian Separation:
    • Blind Spots:
    • Overhead Hazards:
  • Post-Operation & Shutdown
    • Secure Parking:
    • Isolation:
    • Refuelling/Charging:
  • VOC Statement issued (Verification of Competence)

VOC Statement Issued For:

Walkie Stacker

Duration: 3 hours in person
Cost: $250 per person

Topics include:

  • Tailored to the specific workplace tasks/equipment
  • Pedestrian operated forklift
  • Pre-Operational Inspection
    • Visual:
    • Battery:
    • Controls:
  • Operational Fundamentals
    • Tiller Arm:
    • Braking:
    • Data Plate:
  • Load Handling & Stability
    • Stability Triangle:
    • Travel Position:
    • Stacking:
  • Workplace Hazard Management
    • Crush injuries
    • Emergency procedures:
    • Pedestrians:
    • Environment:
    • Slopes:
  • Shutdown & Safety Protocols
    • Secure Parking:
    • Fault Reporting:
    • Charging:
  • VOC Statement issued (Verification of Competence)

VOC Statement Issued For:

Attachments/Data Plates

Duration: 3 hours in person
Cost: $200 per person

Topics include:

  • Tailored to the specific workplace tasks/equipment
  • Decoding the Data Plate
    • Rated Capacity:
    • Load Centre Distance (LCD):
    • Lift Height vs. Capacity:
    • Mast Tilt Limits:
    • Tyre & Battery Info:
  • Attachment Safety & Capacity Derating
    • Manufacturer Approval:
    • Derating Calculations:
    • Common Reductions:
    • Specific Attachments: (eg Slippers, Jib):
  • Practical Exercise: The “Math of Stability”
    • Extended Load Centres:
    • Static vs. Dynamic Loads:
    • Securing Attachments:
  • VOC Statement issued (Verification of Competence)

VOC Statement Issued For:

Manual Handling

Duration: 3 hours in person
Cost: $200 per person

Topics include:

  • Tailored to the specific workplace tasks/equipment
  • Risk Assessment (TILE)
    • Task:
    • Individual:
    • Load:
    • Environment:
  • The Mechanics of a Safe Lift
    • Stable Base:
    • Power Zone:
    • Neutral Spine:
    • The Grip:
    • Pivot, Don’t Twist:
  • Pushing and Pulling
    • Pushing is Preferred:
    • Grip Height:
    • Leg Power:
  • Team Lifting & Mechanical Aids
    • Team Lifts:
    • Mechanical Aids:
    • Load Breaking:.
  • Hazardous Manual Tasks
    • High Force:
    • Awkward Postures:
    • Vibration:
  • VOC Statement issued (Verification of Competence)

VOC Statement Issued For:

Other Custom Work Tasks

Duration: 3 hours in person
Cost: $250 per person (approx.)

Topics include:

  • Tailored to the specific workplace tasks/equipment
  • We will scope the training requirement with you and tailor the training to suit your needs.
  • VOC Statement issued (Verification of Competence)

5 Star Reviews

5,000 Happy Students

25+ Years Of Experience

Verification of Competence

Modules

Forklift VOC

Groups of 3-6, 2-3 Hours
Cost: $235 per person

  • One On One Observation
  • Instruction From Qualified Trainer/Assessor
  • Data Plate Reading
  • Understanding Data Plates
  • Apply Data Plate Knowledge To Loads
  • Load Characteristics
  • Assessing Loads
  • Apply Load Centre Distances
  • Non Standard Attachment Capacity
  • Correct Mast Positioning
  • Forks Arms Used Cleanly Without Disturbing Loads
  • Selects Correct Hydraulic Controls
  • Lifting Loads Safely
  • Placing Loads Safely
  • Correct Use Of Brake
  • Correctly Position The Load Relative To The Rack/Truck Tray/Trailer/Loading Dock Before Placing The Load
  • VOC Statement Issued

Note: The Above List Is Not Exhaustive.

Walkie Stacker VOC

Groups of 3-6, 2-3 Hours
Cost: $215 per person

  • Start Up Checks
  • Safe Surroundings Check
  • Data Plate Reading
  • Apply Data Plate Limits
  • Load Characteristics
  • Forks Arms Used Cleanly Without Disturbing Loads
  • Selects Correct Hydraulic Controls
  • Lifting Loads Safely
  • Placing Loads Safely
  • Battery Recharging
  • Hazard Control
  • PPE
  • Practical Assessment
  • Knowledge Assessment
  • Training Documentation & VOC Statement Issued

Note: The Above List Is Not Exhaustive.

Data Plate VOC

Knowledge & Practical 1-1.5 Hours
Cost: $99 per person, Small Groups

  • Data Plate Reading
  • Understanding Data Plates
  • Apply Data Plate Knowledge To Loads
  • Load Characteristics
  • Assessing Loads
  • Load Centre Distances
  • Non Standard Attachment Capacity
  • Certificate Issued

Case By Case

Times & Delivery Vary
Cost: P.O.A

  • Training Tailored To Your Site
  • Areas Of Concern For Safety
  • Pre & Post Start Checks
  • Identify Surrounding Hazards
  • Face To Face & Online

What Our Students Say About us...

As one of Queensland’s top training providers, we’ve trained thousands students over 17 years. With many five-star reviews, our structured program ensures quality education, hands-on experience, and safe operation skills.

Perform Training I RTO 317454.9
Based on 200 reviews
See all reviews
review us on
sunghyun ko
1 day ago
I was very nervous about completing the forklift certification course. The theory exam, in particular, was a huge burden. However, thanks to the instructor's extensive knowledge and experience, I was able to prepare well for the exam. The practical training and assessment were also guided professionally. I believe this will be of great help when I return to work, as I will be able to remember what I learned in the lectures and practice sessions.
Cam Porter
2 days ago
Very helpful, highly recommend
mohammad zuhayr idoo
3 days ago
Amazing company , and amazing people . Felt really at ease and comfortable. Michael such a great and amazing teacher as well as an amazing person. Billie really wonderful and help out a lot
Tiahna Lunson
3 days ago
Amazing place to train and get your forklift license. Micheal and Billie are so kind and patient. So thankful for them.
john arthur
1 week ago
This was the best 3 days of training ever. So great to meet trainers that really want you to be the best you can. Well worth it very happy 😁
Melota Onofia
1 week ago
It was a great experience i had coming in to the Loganholme Perform Training Centre, got a taste of bit of both the Theory and Practical assignment that was given. Lovely instructors kind and warm welcoming people. Thankyou heaps Loganholme team
Ryan Allen
2 weeks ago
The team was super helpful, and a great price for what they offer.
riley teohaere fox
3 weeks ago
Sean McGrath
3 weeks ago
I was required to get my forklift licence for work. I found Perform Training through a friend who had also used them for their licence. I had Mike as my instructor and he was very thorough throughout the whole process. He was encouraging, patient and made the course information both relevant and interesting. I would highly recommend both Michael and Perform Training if you are considering/required to get your forklift licence.
Caiden Garrett
4 weeks ago
Definitely recommend grant did a great job teaching Billie was a great assessor
Jayda Hillman
1 month ago
Awesome introduction to forklifting. Well supported throughout the course, with both the physical and theory assessments. Great learning space and very lovely staff.
Matt B
1 month ago
Completed the Forklift training at the Loganholme centre. The staff were awesome, friendly, helpful and Grant is a great teacher. Highly recommend.